CEILING BATTEN Tech Specs

Supa Batten ceiling battens provide a durable, high-strength steel alternative to timber. Engineered for residential linings, our system reduces framing movement and minimizes plasterboard cracking over long periods.

Material & Standards

Steel Grade

Roll-formed alu zinc or Truecore meeting Australian building standards.

Profile Details

0.42 x 22mm height. Features a reinforced edge design to improve rigidity and handle safety during installation.

Gauge/BMT

Precision manufactured at a 0.42mm Base Metal Thickness. Designed for structural performance and efficient site stackingability.

Key Features

Textured fixing surfaces and condensation management recesses combine to extend service life and improve screw grip accuracy.

TECHNICAL

Ceiling Batten System – Design & Installation Guide

Supa Batten ceiling battens are engineered to deliver a strong, lightweight support system for plasterboard ceilings.
Manufactured from alu zinc/Truecore, they provide a durable and cost-effective alternative to traditional timber battens.
Designed for compatibility with standard residential ceiling linings, Supa Batten offers a reliable fixing surface while helping maintain ceiling integrity over time.
Steel construction assists in reducing movement associated with timber framing, minimising the risk of cracking in finished plasterboard ceilings.

Key Features

Reinforced edge design with folded edges improve rigidity and reduce sharp edge exposure during handling.
Lightweight high-strength thin-gauge material provides strength while remaining easy to cut and install.
Optimised profile height and engineered for structural performance and efficient stacking during transport.
Condensation management profile includes a formed recess to reduce moisture retention and extend service life.
Textured fixing surface assists with screw grip and improves installation accuracy.
Long-length/custom lengths supplied to reduce joins and improve installation efficiency.

Material & Standards

Supa Batten is roll-formed from high tensile steel with a corrosion-resistant coating suitable for internal building applications.

Typical material properties:

Base metal thickness: 0.42mm
Yield strength: 550 MPa
Coating class: AM150 (or equivalent)
Compliance: Manufactured to relevant Australian steel standards

Performance Specifications:

Batten mass: ~0.35 kg/m
Maximum recommended span*: 1200 mm
Maximum spacing: 600 mm
Suitable for plasterboard up to 13 mm thickness

*Span values assume continuous installation over multiple supports.

Installation Guidelines

Fixing to Timber Framing:
Secure each batten at every support point using:

Minimum 10g x 25 mm timber screws
Fix through both flanges into the substrate

Fixing to Steel Framing
Secure each batten at every support point using:

Minimum 10g x 16 mm self-drilling screws
Fix through both flanges into the steel member

Plasterboard Installation

Fix plasterboard sheets directly to battens
Follow plasterboard manufacturer specifications for screw type and spacing

Important Notes and General Recommendations

Battens are not designed to support foot traffic.
Store in a dry, covered area prior to installation.
Avoid contact with incompatible materials that may cause corrosion.
Ensure proper handling to prevent deformation.
Always install in accordance with relevant building codes and standards.
Confirm span and spacing requirements with project engineer if loads differ from typical residential applications.
Refer to plasterboard manufacturer guidelines for lining installation.